80TPH FFB Palm oil mill, palm oil mill design, equipment to start up palm oil mill process with CE BV Certifications

The quick wear part of Oil Fractionation Equipment use good quality steel which processing by cementation heat treatment. So this treatment can extend working life, reduce use-cost and maintenance time.Shandong Leader Machinery Co.,ltd. palm oil fractionation equipment 80TPH FFB Palm oil mill, palm oil mill design, equipment to start up palm oil mill process with CE BV Certifications adopt new type big modulus helical gear transmission, can boost transmission efficiency, reduce energy consumption.Extended barrel of palm oil fractionation equipment 80TPH FFB Palm oil mill, palm oil mill design, equipment to start up palm oil mill process with CE BV Certifications make the squeezed time longer, boost the efficiency of oil.Shandong Leader Machinery Co.,ltd. 20 years of production experience, 18 years of overseas service system installation. Robust Oil Mill and oil refinery machines designed for minimum Wear and Tear.Oil Fractionation Equipment Totally Steel Fabricated machinery.80TPH FFB Palm oil mill, palm oil mill design, equipment to start up palm oil mill process with CE BV Certifications Low Maintenance oil mill machines with high oil productivity.Low Space occupancy of our machines Oil Fractionation Equipment.Continuous Research Development in order to provide best performance 80TPH FFB Palm oil mill, palm oil mill design, equipment to start up palm oil mill process with CE BV Certifications.Shandong Leader Machinery Co.,ltd. possess a team of experts who source products of international standard to keep abreast with the global markets.Shandong Leader Machinery Co.,ltd. endeavor to provide the best has been acknowledged by our clients both in domestic and international arena.We know 80TPH FFB Palm oil mill, palm oil mill design, equipment to start up palm oil mill process with CE BV Certifications industry. We know technology. We know how to enhance your success.

80TPH FFB Palm oil mill, palm oil mill design, equipment to start up palm oil mill process with CE BV Certifications

company information

Our Strength
1, Established in 1982, we have more than 30 years experience. Our goal is to be pioneer in
global and oil industry.

2, We have deep cooperation with Shandong Machine Design Research Institute and Shandong
University of Technology. Our professor often go abroad attending and oil conference and forum.
3, We have completed service line including technical department, engineering department,
project department, electronic commerce department, domestic trade department and foreign trade department.
After signing contract, we will set up special team including engineers, installation technicians, drawing
designer, business person, after-sales service person, and so on. We will provide one-to-one service.

Our Service
Whole set of equipment for production line.
Motor and power control system.
Installation material.
Installation and test-run.
Drawing of process description, equipment layout, foundation and
hole, construction.
Drawing of power control.
Isolation and painting for equipment.
Water recycling and cooling system outside the plant (i.e. supplementary device).
Staff training and long-term technical service.

Main Business Field
1, 10-500t/h oil material primary cleaning,drying and storage section turn-key project.
2, 100-3000 t/d oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot
dehulling, bean skin crushing, the soybean extrusion, high oil contained pre-pressed cake
extrusion and high oil contained flakes puffed directly). Rice bran turn-key project.
3, 100-3000 t/d leaching workshop turnkey project (towline extractor, rotocel extractor, loop
type extractor,
4, DTDC separated machine, the full negative pressure evaporation,
5, Paraffin wax recovery, leaching workshop degumming, phospholipid concentration.
6, 30-1000T/D continuous physical (chemical) refining line.
7, 20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turnkey project.
8, 10-200T/D fatty acid esterification edible ol production line.


Available Oil Raw Materials:

product description

Machines and equipment to start up palm oil refining plant with CE BV Certifications What kind of crude vegetable oil can be refine?

Crude soybean oil, palm oil, palm kernel oil, sunflower oil, canola oil(rapeseed oil)
,peanut oil,
sesame oil, conttonseeds oil etc.



Machines and equipment to start up palm oil refining plant with CE BV Certifications The main part of refining.

Machines and equipment to start up palm oil refining plant with CE BV Certifications Hydration Deguming amp; Alkali Refining Deacidification

The crude oil is output by the oil feed pump from the oil tank, and next enters the crude
oil heat
exchanger to recover part of heat after metering and then is heated to the required
temperature
by the heater. After that, the oil is mixed with the metered phosphoric acid or citric acid
from
phosphate tank in the gas mixture (M401), and then enters the conditioning tank (R401) to
make
the non-hydratable phospholipids in oil change into the hydratable phospholipids.
Add the alkali for neutralization, and the alkali quantity and alkali solution concentration
depend
on the quality of the crude oil. Through the heater, the neutralized oil is heated to the
temperature (90℃)
suitable for centrifugal separation to remove the phospholipids, FFA and other impurities in
the crude oil.
Then the oil goes to the washing process.

Machines and equipment to start up palm oil refining plant with CE BV Certifications Bleaching

In normal situation , there is pigment in the crude oil , we need to using the active clay
to absorb the
pigment away , after 20 mins , we use the vibrating filter to filter the waste clay away .
If you want
to get light color oil , you need to add more active clay . That is mean , the customer can
accord to his
requirement to control the oil color. This process is carried out under the vacuum
condition.



Machines and equipment to start up palm oil refining plant with CE BV Certifications Deodorization

Usually ,there are some odors in the crude oil , it affects the quality of the edible oil .
About our
refining process , we usually use the direct steam to take odors away in the vacuum
condition .
General speaking there is about 0.5% water in the alkali refined oil, in the deodorization
pot,
thetemperature is very high , it also can finish the dehydration section.



Machines and equipment to start up palm oil refining plant with CE BV Certifications Filtering

This process can remove off the small amount of unsettle gum soluble impurities in the
degummed
oil, after oil dehydrate cooling (60 °C), filtering again, to ensure the product oil
quality. Then pumping
the final oil into the oil tank.

3. Machines and equipment to start up palm oil refining plant with CE BV Certifications Main section

(1) Refining section: used to P-acid de-gumming, alkali refining de-acid and water rinsing.

(2) Decoloring section: used to remove off pigments, bleaching oils and grease dehydrate.

(3) Deodorizing section: to remove off the odor components in oil.

(4) Dewax: used to remove off the wax in the oil, in order to get the high quality oil.

(5) Heat-transfer oil stove: supply each device production needing heat energy, temperature
reach above 280C.

(6) steam generator: produce the needing steam for de-odoring and distillation.

(7) Vacuum pump: supply needing vacuum for dehydrate, de-color, de-odor. Vacuum degree
can reach above 755mm Hg.

(8) press filter: filter clay, filter out clear oil.

(9) Air compressor: blow dry bleached clay, blow empty the leftover oil in the press filter.

Our Services

1 Engineers to the scene to guide the installation;

2 Online question reply;

3 The warranty period of 12 months;

Our engineers in guiding workers how to operate the machine:

Packaging amp; Shipping

Certifications

Contact with me

Shandong Leader Machinery Co.,ltd. the crude oil is output by the oil feed pump from the Oil Fractionation Equipment oil tank, and next enters the crude oil heat exchanger to recover part of heat after metering and then is heated to the required temperature by the heater. After that, 80TPH FFB Palm oil mill, palm oil mill design, equipment to start up palm oil mill process with CE BV Certifications the oil is mixed with the metered phosphoric acid or citric acid from phosphate tank in the gas mixture (M401), and 80TPH FFB Palm oil mill, palm oil mill design, equipment to start up palm oil mill process with CE BV Certifications then enters the conditioning tank (R401) to make the non-hydratable phospholipids in oil change into the hydratable phospholipids. Shandong Leader Machinery Co.,ltd. Add the alkali for neutralization, and the alkali quantity and alkali solution concentration depend on the quality of the crude oil. Through the heater, Oil Fractionation Equipment the neutralized oil is heated to the temperature (90°C) suitable for centrifugal separation to remove the phospholipids, FFA and other impurities in the crude oil. Then the Oil Fractionation Equipment oil goes to the washing process.Oil Fractionation Equipment there is still about 500ppm soap in the neutralized oil from the separator. To remove the remaining soap, 80TPH FFB Palm oil mill, palm oil mill design, equipment to start up palm oil mill process with CE BV Certifications add into the oil about 5~8% hot water, with water temperature 3~5 °C higher than the oil generally. To achieve more stable washing effect, add phosphoric acid or citric acid when washing. Shandong Leader Machinery Co.,ltd. The re-mixed oil and water in the mixer is heated to 90-95°C by the heater, and then enters the wash separator to separate the remaining soap and most water. The water with soap and oil enters 80TPH FFB Palm oil mill, palm oil mill design, equipment to start up palm oil mill process with CE BV Certifications into oil separator to separate out oil in the water. Further catch the oil outside, and the waste water Shandong Leader Machinery Co.,ltd. is discharged to the sewage treatment station.

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
Email:sales21@ldfoodmachine.com
Whatsapp:+86 13064099546
Skype:leaderfoodmachine21
Contact:Mandy

NOTE:We can specially design the machine according to your production's features.