5T~200TPD transformer oil filter from manufacturer

Specifications

transformer oil filter
1.Stable structure
2. Large capacity
3. Excellent performance
4. International standard

5T~200TPD transformer oil filter from manufacturer

OUR MAIN BUSINESS FIELD:

10-500T/H oil material first cleaning,drying and storage section turn-key project;

100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). Rice bran production line turn-key project;

100~300TPD Leaching workshop turnkey project (Towline extractor, Rotocel extractor, loop type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate);

30-1000T/D oil continuous grade one or two physical (chemical) refining production line;

20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project;

10-200T/D Fatty acid esterificationproduction cooking oil production line.

INTRODUCTION OIL CONTINUOUS REFINING DEODORIZING PROCESS:

1. The qualified decolored oil enters into the spiral plate heat exchanger to recover most of the heat;

2. Then it goes to high pressure steam heat exchanger to be heated to the process temperature (240-260°C) and enters the deodorization tower.

3. The upper layer of combined deodorization tower is the packing structure which is mainly used to remove the odor producing components such as free fatty acid (FFA); the bottom layer is the plate tower which is mainly for achieving the hot decoloring effect and reducing the peroxide value of the oil to zero.

4. Oil from the deodorization tower enters into the heat exchanger to recover most of the heat and makes further heat exchange with crude oil, and then is cooled to 80-85°C through the cooler.

5. Add the required anti-oxidant and flavor agent, and then cool the oil below 50°C and store it.

6. Such volatiles as FFA from the deodorizing system are separated by the packing catcher, and the separated liquid is FFA at low temperature (60-75°C). If the liquid level in the temporary tank is too high, the oil will be sent to the FFA storage tank.

WORKING PROCESS OF OIL REFINING MACHINES:

(1) Pump crude oil into refining tank and heat with conduction oil, and the temperature will reach about 70°C-80°C after one hour.

Add acid or alkali to separate according to the acid value. After one hour's processing and 4-6hours deposit, then convey soap stock to storage tank.

(2) Pump refined oil into decoloring tank. When it is up to 90-110°C after one hour's heating, add clay into tank for 20min's processing. Then separate clay and oil with filter.

(3) Put discolored oil into deodorization tank with vacuum pump. Heat and process with steam for odor removal. After filtering, you will get final oil product.

THE PARAMETERS FOR CRUDE COCONUT OIL:

Item	Standard
Smell and taste	The original smell and taste of oil
Moisture and volatile matter (%)	≤ 0.20
Insoluble impurities (%)	≤ 0.20
Acid value (mgKOH/g)	≤ 4.0
Peroxide value (mmol/kg)	≤ 7.5

THE PARAMETERS FOR REFINED COCONUT OIL:

Item	Standard
Color (Lovibond Cell 133.4mm)	≤ R2.0 Y20
Smell and taste	No smell and good taste
Transparence	Clear and transparent
Moisture and volatile matter (%)	≤ 0.05
Insoluble impurities (%)	≤ 0.05
Acid value (mgKOH/g)	≤ 0.20
Peroxide value (mmol/kg)	≤ 5.0
Smoke point (°C)	≥ 215

Machines from Shandong Leadere amp; Oil Machinery Co,.Ltd have been widely- exported to more than 30 countries, like Russia, India, South Africa, Thai, Nepal, Indonesia and so on.

Shandong Leader Machinery Co.,ltd. oil press machine is composed of feeder, gearbox, pressing cage, screw shaft and machine stand etc.The Fully-automatic oil machine also have oil filter and heating system. Pretreatments of Oilseeds in Oil Production Line utilize the screw shaft that is setup with different styles of screws and rotates when machine is running to push the material into chamber. Then the oil is separated out through the extrusion of pressing worm and pressing ring.
5T~200TPD transformer oil filter from manufacturer Main parts of chamber through the processing of high-temperature tempering and low temperature quenching;Cake thickness can be adjusted once the machinery stop running;5T~200TPD transformer oil filter from manufacturer Final oil is high quality, good smell, and high yield rate.

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
Email:sales21@ldfoodmachine.com
Whatsapp:+86 13064099546
Skype:leaderfoodmachine21
Contact:Mandy

NOTE:We can specially design the machine according to your production's features.