China professional manufacturer soybean oil refinery in india

This treatment technology of Biodiesel Oil Production Line is newly developed by our company Shandong Leader Machinery Co.,ltd., which can meet high quality standards of biodiesel and have many advantages such as fast reaction speed, high conversion rate, vitriol not required to be catalyst, sulphur controlled below 10ppm, small corrosivity to equipment, zero waste water discharge and others. The research of this technology China professional manufacturer soybean oil refinery in india changed the record of using heterogeneous catalyst in old technologies, breaking the history of only having national standard biodiesel but no European standard biodiesel.Our company Shandong Leader Machinery Co.,ltd. regards "quality is life"as our enterprise spirit. Our products have already passed relevant International Quality Management System Certifications. Our products are also exported to European Union. We adopt highly abrasive materials and advanced processing technique of China professional manufacturer soybean oil refinery in india, making the devices have long service life and wear-proof performance. We have won a great reputation at home and abroad.

Technical flowchart of crude palm oil refining machine

Alkali hot water

↓

Crude oil→ filter→ mix→ reactor→ mix→ reactor→ centrifugal separation→ oil residue

↑ ↓

Phosphoric acid hot water→ mix

↓

degumming oil← cooler ←dry ←centrifuge separation ←mix ←alkali liquor

↓

vacuum steam jet pump ← steam citric acid

↓ ↓

bleaching earth→ mix→ decoloring→ filter→ decoloring oil→ mix→ heat

↓

refined oil← filter ← cool ←deodorizing ←vacuum

Main process introduction of palm oil purification process

1)Neutralization section

After heating, oil is then carried out with caustic soda to saponify the fatty acids and to ease the removal of the precipitate in centrifugal separator. The contact is made in mixer, and then a short contacting time is allowed in reactor. The lye saponifies the fatty acids in the oil and forms soap stock, which is removed together with the gums and the excess caustic solution. The caustic soda solution is coming from the caustic dosing device. The neutralized oil still contains small amounts of residual soap, which must be minimized before further processing. Some soft hot water (usually boiler treated water or steam condensates) is added to the oil in mixer and is then sent to washing centrifugal separator, where the residual soap is separated from the oil. The oil is dried under vacuum as the residual moisture must be reduced. The oil is first heated in a plate heat exchanger, by means of low pressure steam. The oil is then dried under vacuum in the dryer. of the bleaching section with its vacuum group. Then the oil is sent to the bleaching section by pump.

2)Bleaching section

Crude oil is fed to the oil-earth mixer through heat exchanger and heater. Prior to bleaching, the bleaching earth is dosed into the oil by means of a volumetric dosing system. The bleaching earth hopper is installed above the oil-earth mixer and assures continuous operation of the plant. The hopper can be automatically filled by means of the pneumatic earth feed assembly. After bleaching earth dosing, the oil flows into the bleacher. After bleaching, the oil-earth mixture is sent to filter and security filter by means of pump. After the filtration operation, oil recovery from spent cake is done by steam blowing and the spent cake is discharged and evacuated through a chute to a disposal container.

3)Deodorization Section

The bleached oil is first de-aerated in a buffer tank, It works at the same vacuum as the deodorizer and acts also as buffer feed capacity. After deaerator, Oil is sent by pump to be preheated by the heat exchange with the deodorized oil to a temperature between 190° and 210°C, and deodorized oil is cooling to a temperature of about 135°C. Finally, the oil is heated by conduction oil or high pressure steam until it reaches the final deodorizing temperature. After deodorization, the oil is cooled with feeding oil, polished, and pumped into storage tank.
This cooling and contact combined with a lower velocity will allow catching nearly all fatty acids distillates present in the gas flow.

4)Crystallization Section

Feedstock is heated and pumped to crystallizers. The oil is cooled according to a pre-determined cooling profile by means of controlling the temperature of the cooling medium circulating in the cooling coils. The design of this cooling profile depends on the quality of feedstock and the quality of olein/stearin fractions required. This is to keep the oil homogenized with frequency mechanical agitation in the crystallizers. A typical cooling program lasts for a certain time, depending on the quality of feedstock and product. When the oil appears as a thick semi-solid mass (slurry) containing stearin crystals in liquid olein, it is ready for filtration. If the crystallization result is not desirable, the slurry can be circulated through the feed oil heater for re-heating before being sent back to the feed oil tank for re-processing.

5) Filtration Section

When crystallization is completed, the slurry is fed to the Membrane Filter Press for filtration. The operation includes filter feed, filtering, squeezing and cake releasing. When the chambers are full after cake forming, the pumping will stop and the membranes are inflated to squeeze dry the filter cakes. After which, the residual oil in the core is blown dry by compressed air. Thereafter, the filter is opened and the cake will drop into a stearin tank. The stearin cake is melted in this tank by steam coils before it is discharged to storage. Olein flows into the olein tank, and is pumped to the outer olein storage tank.

Successful project cases of palm oil purification process

Our workshop to manufacturer palm oil purification process

Delivery onsite of palm oil purification process

Biodiesel Oil Production Line Totally getting rid of sulfur as catalyst and fully overcoming the problem of equipment corrosion caused by sulfur.China professional manufacturer soybean oil refinery in india Products meet the sulfur content standards since we stopped using sulfur as catalyst.Because we don’t adopt reaction of methyl alcohol and free fatty acid, so no water exists in methyl alcohol, which reduces China professional manufacturer soybean oil refinery in india equipment investment.Shandong Leader Machinery Co.,ltd. By reason of not using mineral acid,emission loads of acid water and acid slag have greatly decreased, relatively reducing environmental pollution; Shandong Leader Machinery Co.,ltd. Some glycerin can be recycled and utilized continuously for several times, which saves production costs. Biodiesel Oil Production Line Products and raw materials exchange heat continuously for several times, realizing the cyclic utilization of thermal energy and significantly saving production costs of Biodiesel Oil Production Line.Independently researched and developed turbulent flow type tubular reactor China professional manufacturer soybean oil refinery in india can realize continuous reaction at low temperature and product quality can be controlled on-line at any time, which thoroughly solves the instability problem of products generated by kettle type reaction, getting standard products of unified quality.

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
Email:sales21@ldfoodmachine.com
Whatsapp:+86 13064099546
Skype:leaderfoodmachine21
Contact:Mandy

NOTE:We can specially design the machine according to your production's features.